DOP Series Human Machine Interface Features and Introduction

DOP
Series Human Machine Interface
ScrEdit software is a user-friendly program editor
of DOP-A, DOP-AE and DOP-AS series HMI for Windows. Please refer to the
following section for its features and function introduction. 
PLC
Serial Drives Support
DOP series HMI’s support more than twenty brands of
PLC’s, including Delta, Omron, Siemens, Mitsubishi, etc. 
Windows®
Fonts Support for ScrEdit Software
Except Simplified Chinese, traditional Chinese and
English languages, ScrEdit software also providesthose fonts that Windows®
uses.
Quick
Execution and Communication Macro
It can handle complicated calculation by executing
macro. The user can also write communication protocol with communication macro
command to connect specific system via COM port.
Rapid
USB Upload/Download
It will shorten upload/download time by using USB
Ver1.1.
Recipes
It provides useful recipe editor that is similar to
Microsoft excel for user to edit recipe easily and input multiple recipes
simultaneously (size limit is 64K). When downloading multiple recipes at the
same time, it can exchange by internal memory of HMI. If data has finished
editing when downloading, you can download recipe individually.
Direct
Communication with Two or Three PLCs
DOP-A series HMI is able to connect to two different
or the same controllers via two communication ports. Up to three communication
ports are provided in DOP-AE and DOP-AS series HMI for direction connection to
PLCs.
Support
Multiple PLC’s Connections
One DOP series HMI can connect to multiple
controllers in serial through COM2 of RS-485 port (NOTE 1).
Simulation
Function (NOTE 2)
HMI ScrEdit software provides simulation feature
which allows the user to develop and debug software on the PC connected to DOP
series HMI before downloading it to DOP series HMI.
Off-line
Simulation:
When the editing and compile operation is
completed, the user can use off-line simulation function to simulate HMI
operation and check if it is correct or not through the PC directly without
connecting to the controller.
On-line
Simulation:
When the editing and compile operation is
completed, the user can use on-line simulation function to simulate HMI
operation and check if it is correct or not through the PC directly with
connecting to the controller.
Using
SM Card to Backup Data
SM card can also be used to backup data or transfer
data to another HMI. After data transmission, the data can be saved into the
FLASH memory of HMI. History list and alarm message can be also saved in SM
card and the user can read these files by card reader for collecting data and
printing.
Multiple
Security Protection
It provides passwords to protect designer’s
intellectual property rights and also for the user to set the user’s priority
for important components. Only the user, whose priority is higher than the
component, can use the component.
USB
Host Port (USB Host) Equipped
Parts of DOP series HMIs have a built-in USB Host
interface for the connection to USB flash drive, card reader and printer with
USB socket. The user can save data, copy program and print the screen
immediately and increase the data storage space.
Multiple
Security Protection
It provides passwords to protect designer’s
intellectual property rights and also for user to set user priority for
important component.
Multi-Language
Support
It is easy for the user to switch the desired
language via HMI or the external controller. Furthermore, Unicode editing is
supported, and therefore it is convenient for the user to create and edit more
quickly

Leave a Reply