Introduction to Siemens S7 PLC Hardware

Introduction to Siemens S7 PLC Hardware 

Siemens
have SIMATIC (Siemens Automatic) Series PLC with 3 category.

  •            Micro PLC 
    (Siemens Logo and S7-200,1200)

  •            Basic PLC (Siemens S7-300,S7-1500)
  •            Advanced PLC (Siemens S7-400)

Please
find the below image for positioning of Modular PLC series in SIEMENS.

For the
Siemens PLC before 2010 there was SIMATIC Manager software for Step 7 PLC
programming except from S7-200. For the S7 200 we need MicroWin Software.
Right
now SIEMENS have latest TIA (Totally Integrated Automation) software for PLC
programing as well SCADA,HMI designing and Drive commissioning.

TIA is
integration of 3 software’s
  •     Step7 For Siemens PLC Hardware configuration and
    Programming
  •       Wincc (Windows Control Center) for Siemens SCADA
    & HMI configuration& programming
  •       Start Drive for SINAMICS Series AC drive commissioning
    & parameterization.

The
Modular Controllers have been optimized for control tasks and specially
designed for ruggedness and long-term availability. They can be flexibly
expanded at any time using plug-in I/O modules, function modules, and
communication modules. Depending on the size of the application, the right
controller can be selected from a wide range according to performance, quantity
frameworks, and communication interfaces. The modular controllers can also be
used as fault-tolerant or fail-safe systems.

S7-1200 PLC


Here we
will understand S7 1200 Modular PLC hardware and its features.
 S7-1200 PLC is widely used PLC
in small application with modular based IO.
You can extend max 11 IO modules (depends upon
CPU model) with the S71200 PLC.

You can integrate SIMATIC
Memory card to expand CPU memory. The SIMATIC memory card is used as plug-in
load memory or for updating the firmware. STEP 7 projects including comments
and symbols, additional documentation or csv files (for recipes and archives)
can also be stored on the SIMATIC memory card. Data blocks can be created and
data stored or read via SFCs on the SIMATIC memory card with the user program

Communication protocols would
be Profinet or Industrial Ethernet port by default but you can add other
communication block for another communication protocols lilke RS-232, RS-485,
Modbus, AS-I etc.


You can integrate Signal board
with S71200 for extra IO (Max 2 analog or digital) without expanding physical
size of the PLC.
You can write different PLC
Programming languages in Siemens PLC as below
  •                Ladder
    (LDR)
  •                STL
    (Statement List)
  •                FBD
    (Function Block Diagram)
  •               Sequential
    Control Logic (SCL)

In S71200 we will get technological
function like PID & High Speed Counters in built , so no need extra
controller for close loop control.
 

S7
300 PLC

The S7-300 automation system is
modular in design. It has a comprehensive range of modules that can be combined
individually.
A system includes the following:

 A CPU: Different CPUs are available for
different performance ranges, including CPUs with integral inputs/outputs and
the corresponding functions, as well as CPUs with integral PROFIBUS DP, PROFINET
and point-to-point interfaces. Signal modules (SMs) for digital and analog
inputs/outputs.

Communications processors
(CPs) for bus connection and point-to-point connections. Function modules (FMs)
for high-speed counting, positioning (open-loop/closed-loop) and PID control. Max
32 IO module can be connected with S7 300 PLC.

The following can also be used depending on requirements:
Load power supply (PS) for
connecting the SIMATIC S7-300 to a supply voltage of 120/230 V AC.
Interface modules (IMs) for
connecting the central controller (CC) and expansion units (EUs) in multi-tier
configurations. The SIMATIC S7-300 can be operated with up to 32 modules
distributed across the CC and 3 EUs. All modules can be operated in enclosures
and without fans.

 SIPLUS modules for extended environmental
conditions, Suitable for temperature range -25 to +60 °C, and higher humidity,
condensation and frost loads. Can be used direct on vehicles or outside
building in an IP20 cabinet protected against direct sunlight and
rainwater/spray water. Air-conditioned cabinet and IP65 housing not required.

If you Like the Post Please Share it!!
Join Our Blog and Like us on Facebook

Leave a Reply