Addressing of Siemens PLC S7 200

Join Our Official PLC Tutorial Point Telegram Channel

Addressing of Siemens PLC S7 200

Digital Input
I0.0 to I0.11
Digital Output
Q0.0 to Q0.7
Analog Input
IW0
Analog Output
QW0
Timers
T32 to T63
For Timers : Time Delay = Time Base * Preset
Time Done Bit : Tx
Where X is address of Timer used.
Addressing of Siemens PLC S7 200
Addressing of Siemens PLC S7 200

 

Counters
C0 to C63
For Counter:  Preset is number of Counts.
Counter Done Bit : Cx
Where X is address of counter used.
Integer
VW0 to VW1022
Binary
V0.0 to V1023.7
Programming Software : Microwin
Driver For Programming: PPI Driver.
Driver For SCADA Communication : S7200PPI DDE

Leave a Comment