Basic PLC Ladder Programming Training Examples for Beginners.
Hi friends here we are starting here a series of Free Training on PLC Ladder Programming training & tutorials.These PLC Ladder Programs
are important to get basics of Ladder programs.
PLC Ladder logic Problem
Controlling the running state of the 1 ph motor by pressing START and STOP pushbuttons i.e. motor should remain in ON state after START pushbutton is pressed and should OFF when STOP pushbutton is pressed. Checking if the Motor is running normally by pressing TEST pushbutton.
PLC Ladder Programming Practice Problem 3
Topics Covered in this example is Latching Contacts Ladder Program.
Number of PLC Inputs Required
X0 – START pushbutton to Start Motor
X1 – STOP pushbutton to Stop Motor
X2 – Error signal from Motor to PLC.
Number of PLC Outputs Required
Y0 –1 phase Motor
PLC Ladder Programming:
PLC Ladder Programming Practice Problem3 (plc ladder diagram)
PLC Ladder Program Description:
Press START button lightly and X0 = ON. The Motor will keep running if
no error occurred (X3 = OFF). The action can be practiced by a latching circuit
which takes output Y0 as one of the input condition to keep the motor running
even if the START button is not pressed(See
normally open contact Y0 below X0).
When STOP button is pressed, X1 = ON and Y0 = OFF. The motor will stop
running.
If error occur (X3 = ON), Y1 will be OFF and the motor will stop,.
running.
When TEST is pressed (X2 = ON), Y0 = ON. The motor will start running if
no error occurred (X3 = OFF). On the contrary, when TEST is released, the motor
will stop running. The testing function is performed by this process.
Note: Example is only for training purposes. No practical implementation is done.
Please share the source of the program. I need that textbook.